✨ New Arrivals Just Dropped!Explore
WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat web special*
web special* WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
$140.00
Original: $400.00
-65%WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat web special*—
$400.00
$140.00More Images
WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat web special*
web special* WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
web special* WHEEL 650B x 36h Dyno Shimano DH-3N72 Velocity Dyad/Aeroheat
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
*Well, we occasionally build something that's a duplicate already built, so here's one of those. Shimano's next-to-most-recent Nexus generator hub (DH N-72), 36-spokes, Velocity Aeroheat 650B rim. Built by Rich Lesnik, Rivendell's wheelbuilder. Ready to ship. $295.
This is Shimano's earlier Dynamo hub, with a steel axle, hence a bit heavier than the newest DH-3N80. But less expensive, and available in 32-spoke AND 36-spoke configurations. If you're looking for a good, tough inexpensive alternative to the more expensive German Schmidt dynamos, this is it. The wheel is built in-house by our wheelbuilder, Rich Lesnik, so you can relax about any possible problems -- there won't be any! (But in the unlikely event that there IS a problem, we'll take care of it.)
Rim tape and quick release skewer included.
-----
Our wheelbuilder, Rich Lesnik, is as good a wheel builder as we know, or have ever known. Every one of us rides his wheels, and we ride them hard and long, and are constantly amazed at the abuse they seem to slough off. Rich is meticulous and uses only the rims and spokes he likes and trusts. He doesn’t build superlight wheels, either (except for Mark here), so don’t ask.
All of our wheels are 3x (three-cross), use butted DT spokes, and…well, they’re just No Nonsense wheels for all-around hard use riding.
Sometimes somebody will think, hey, I’m getting some special wheels….might as well get super expensive hubs. That’s reasonable, but actually is unnecessary. The Shimano LX and XT hubs we have are rock solid, smooth, problem free, and keep the price down. If you want fancier (Phil, White Industries, DT), we can do that, too. Rich can, that is.
There's an almost endless combination of hubs, rims, and spokes to assemble into wheels so for now we just have the standards listed below, but if you want something special by all means call or email [email protected].
